Macro

See also Commands, Controller Guide and Macro Guides

Macros are user-defined sequences of commands that allow you to record multiple actions and trigger them with a single button or key stroke.

Creating Macros

1. Open the Main Menu.
2. Select the User Macro Option under "System".
3. Select the Macro Number you wish to modify.
4. Name the Macro.
5. Select the Macro Icon.
   • Note: for additional icon options, you can use the /macroicon or /micon command within the macro.
   • For example, using /micon "Fast Blade" will set the Macro Icon to the same icon used by this ability (Fast Blade).
6. Add the script to the Macro.

Hotbar Macro Guide by Dying Legacy

1. The Macro can then be set from the Macro UI to the Hotbar as an action.

Limitations

• Each macro can contain a maximum of 15 lines/commands.
• A macro cannot start another macro.
• Only one macro can run at a time. Starting macro will cancel the currently running macro.
• There is no way to change macro's behavior depending on conditions. This means that the actions taken are set and branching commands based on conditions is not possible.
• A character can have a maximum of 100 individual macros.
• The entire account can have maximum of 100 shared macros - these are shared across all characters on the account.
• The process of using macros as actions while using the Wait Function (<wait.X>) to queue actions is inherently slower than manual human input (see below).

Wait Function

You can use the macro-specific subcommand <wait.X> to queue and/or delay the next command in the macro.

For example: the command /ac "Careful Synthesis" <wait.3> will execute the action "Careful Synthesis" and delay the execution of the next queued command in the macro by 3 seconds. The delay time starts when the first command/action is started, not after the specific command/action is executed.

The Wait Function can only delay actions by full seconds; the use of decimal points is not possible. This means that if your recast timer is the standard 2.5 seconds for the Global Cooldown (GCD), then there will be a delay of 0.5 seconds of inaction. As this delay adds up over time across commands within more complex macros, using macros to queue up combat actions is less effective than manual input and is not recommended for multiplayer combat-oriented content.

Uses of Macros

Macros are often used by Crafters to streamline the crafting process for large numbers of items, as using a standardised macro for crafting specific items is more convenient than multiple individual manual inputs. However, there is the potential to miss conditional benefits/demerits that occur during the crafting, such as altered material conditions (Poor/Good/Excellent). High level crafting usually does not fit within the 15 lines limit, so it is recommended to use 2 or more macros for single crafts.

Macros are also often used for other QoL purposes, such as changing your gearsets & combining actions/emotes with messages to other players. This serves to both add ease of convenience to key functions as well as add flavor to interactions with other players.

Another use of macros is to change the game's settings; it is possible to control game settings such as volume, battle effects display toggle, and HUD layouts without navigating through numerous menus.

List of Commands

This section is largely incomplete and is in need of detailing.

Text Commands

In general, entering a text command starting with the forward slash key ("/") allows players to change equipment, use abilities, perform emotes and various other actions. Additional directions such as subcommands and placeholders can be added to commands for even greater customization, such as specifying targets, toggling functions on and off, and so on. The additional directions should follow the main command, separated by a space.

Chat

Main article: Chat Text Commands

Command	Shorthand	Help
/alliance [mes.]	/a	Sends a message to all members of your current alliance, regardless of their location. Typing /alliance or /a without a message switches the default chat mode to [Alliance].
/freecompany [mes.]	/fc	Sends a message to all members of your current Free Company, regardless of their location. Typing /freecompany or /fc without a message switches the default chat mode to [Alliance].
/say [mes.]	/s	Sends a message to all PCs within a small radius. The message will not be displayed if a PC has their [Say] chat filter turned on. Typing /say or /s without a message switches the default chat mode to [Say].
/shout [mes.]	/sh	Sends a message to all PCs in the same area. The message will not be displayed if a PC has deselected [Shout] in the chat filter.
/tell[PC_name] [mes.]	/t	Sends a message to a specific PC within the same World. This message cannot be seen by any other PCs. Typing /tell or /t [PC_name] without a message switches the default chat mode to [Tell].
/party [mes.]	/p	Sends a message to all members of your current party, regardless of their location. Typing /party or /p without a message switches the default chat mode to [Party].
/linkshell [mes.]	/l	Sends a message to all members of your active linkshell, regardless of their location. Typing /linkshell or /l without a message switches the default chat mode to [Linkshell].
/echo [mes.]	/e	Displays a message that only you can see.
/chatmode [chat mode]	/cm	Set the default chat mode. >>Example: /chatmode party (Changes default chat mode to party chat.) The default mode will be deactivated after a single message if it is set to Shout. When setting the default mode to Tell, you are still required to enter the recipient PC's name. If no chat mode is specified, the current default setting will be displayed.

Actions

Command	Shorthand	Help
/action [action name]	/ac	Uses an action on a specified target. This cannot be used with actions you have not yet learned, or when restricted by other factors.
/petaction [action name]	/pac	Uses a pet action on the specified PC. Uses current target when not specified. This cannot be used with pet actions you have not yet learned, or when restricted by other factors. e.g. /petaction Obey
/companionaction [action name]	/cac	ses a companion action. The target of companion actions cannot be specified. This cannot be used with companion actions you have not yet learned, or when restricted by other factors. e.g. /companionaction Attacker Stance
/recast [action name]	none	Displays time remaining until the specified action can be used again.
/actionerror [toggle]	/aerror	Disables, or enabled action errors, useful for preventing messaging on macros that are intended to fallback. Value Description Options On Enable action error messages Off Disable action error messages
/equipaction [slot] [action name]	/eaction	Equips an action to a specified slot. If an action name is omitted, the action currently equipped to that slot will be removed. Basic class actions cannot be removed. Slots are designated by the numbers 1–30.
/actionqueue [subcommand]	/aq	Toggle the priority input feature for actions. Displays whether priority input is enabled or disabled when no subcommand is specified. Value Description Subcommands On Enable priority input Off Disable priority input
/actioncancel [subcommand]	/acan	Enable cancelling of actions by selecting them again from the action bar while they are being cast or channeled. Toggles between on and off when no subcommand is specified. Value Description Subcommands On Enable cancelling via the action bar. Off Disable cancelling via the action bar.

Targeting

Command	Shorthand	Help
/target [subcommand]	/ta	Targets the object/entity specified by [subcommand]. Does not work if the specified entity is out of targeting range or does not exist. Value Description Subcommands <0> Targets self. <1> through <8> Targets the specified party member. (1 is always self.) Other game-recognized target placeholder. Examples: <pet>, <comp> (companion), <tt> or <t2t> (target of your target), <f> or <focus>, etc. Of particular note, <t> or <target> (your target) does nothing with this command, since it will either target what you are already targeting, or will not exist if you have nothing targeted (causing the macro line to return an error). A complete list of game-recognized target placeholders can be found here: https://na.finalfantasyxiv.com/lodestone/playguide/db/text_command/placeholder/
/targetmode [subcommand]	/tmode	Toggle between targeting modes. Value Description Subcommands a Activate targeting mode A. Use up and down to target party members, and left and right to cycle targets based on current target filter. b Activate targeting mode B. Use up and down to select a target filer, and left and right to cycle targets. c Activate targeting mode C. Use up and down to target party members, and left and right to cycle all targets.
/battletargetmode [subcommand]	/btmode	Toggle targeting mode only for enemies that are engaged. Toggle on and off when no subcommand is specified. Value Description Subcommands On Activate targeting mode. Off Disable targeting mode.
/directtarget [subcommand]	/dtar	Toggle direct targeting on. Press accept/confirm to select the nearest target, regardless of filters. Toggle between on and off when no subcommand is specified. Value Description Subcommands On Toggle direct targeting on. Press Accept/Confirm to select the nearest target, regardless of target filters. Off Toggle direct targeting off.
/targetpc	none	Targets the closest PC within a certain radius.
/targetnpc	none	Targets the closest NPC or enemy within a certain radius.
/targetenemy	/tenemy	Targets the closest enemy
/battletarget	/bt	Targets the closest engaged target
/lockon	none	Locks on to the target. Enter the command again to turn lock off.
/autolockon [subcommands]	/autolock	Automatically lock onto targets. Toggle between enabled and disabled modes when no subcommand is specified. Value Description Subcommands On Enable automatic target lock. Off Disable automatic targtet lock.
/assist	/as	Targets the target of a PC specified by a ‹t› or ‹p#› macro.
/subtarget [subcommand]	/st	Toggles subtargeting when executing commands directly from the action bar. Toggle between on and off when no command is specified. Value Description Subcommands On Enable subtargeting. Off Disable subtargeting.
/facetarget	/ft	When executed, the character will immediately turn to face the main target. If the character is in motion, the character will come to an immediate halt.

Equipment

Command	Shorthand	Help
/display[slot] [subcommand]	none	Toggle the display of gear in the head or main hand slots. Gear Slots: main (valid in passive mode only) head Value Description Subcommands On Show the item equipped in the designated slot. Off Hide the item equipped in the designated slot.
/gearset change[num]	/gs change	Changes your equipment to the gearset registered to the [num] specified.
/job [subcommand]	none	Toggle the job associated with your current class. Toggle between off and on when no subcommand is specified. Value Description Subcommands On Activate the associated job. Off Deactivate the associated job.

Party

Command	Shorthand	Help
/partycmd [subcommand]	/pcmd	Executes various party commands. Value Description Subcommands join Accept a party invite. decline Decline a party invite. add [name] Invite targeted PC to your party. leave Leave your current party. kick [name] Oust a PC from your party. breakup Dissolve your current party.
/join	none	Accepts a party invite.
/decline	none	Declines a party invite.

UI Display

Command	Shorthand	Help
/actionbar [subcommand]	/abar	Toggle actionbar display method. Toggles between on and off when no subcommand is specified. Value Description Subcommands on Always display actionbar. off Display bar only when executing commands.
/actionbarhelp [subcommand]	/abarhelp	Display pop-up help text for action bars. Toggle between on and off when no subcommand is specified. Value Description Subcommands on Display help text. off Hide help text.
/targetcursor [subcommand]	/tcursor	Set the default position of the target cursor. Value Description Subcommands a Set to central. b Set to floating. c Set to both central and floating.
/names [subcommand]	none	Turn all name displays on or off. Toggles between on and off when no subcommand is specified. Value Description Subcommands on Turn names one. off Turn names off.
/enemylevel [subcommand]	/elevel	Display levels below enemies' names. Toggles between off and on when no subcommand is specified. Value Description Subcommands on Display enemy levels off Hide enemy levels.
/enemyicon [subcommand]	/eicon	Display active and non-active icons for enemies. Toggles between off and on when no subcommand is specified. Value Description Subcommands on Display active (red) and non-active (green) icons. off Hide active (red) and non-active (green) icons.
/enmity [subcommand]	/enm	Display enemy enmity icons. Toggles between off and on when no subcommand is specified. Value Description Subcommands on Display enmity icons next to enemy HP bars. off Hide enmity icons.
/away [subcommand]	none	Change your online status to away. Toggles between off and on when no subcommand is specified. Value Description Subcommands on Display away icon. off Hide away icon.
/countdown [value]	/count	Initiate a countdown in seconds, starting at the designated value (up to 20 seconds). Countdown length is 5 seconds when no value is specified. Words and numbers displayed will not appear in screenshots.

Menus

Command	Shorthand	Help
/loot	none	Opens your loot list.
/friendlist	/flist	Opens your friend list.
/blacklist [subcommand]	/blist	Opens your blacklist. Command Description Subcommands add [name] Adds the character with the specified name to your blacklist.
/map	none	Opens the current area map.
/supportdesk	/helpdesk	Opens the help desk menu.
/logout	none	Begins the log out process.
/shutdown	none	Log out and exit the game.

Configuration

Command	Shorthand	Help
/shadow [subcommand]	none	Toggle the display of character shadows. Toggles between enabled and disabled when no subcommand is specified. Value Description Subcommands on Enable character shadows. off Disable character shadows.
/dusteffect [subcommand]	/dust	Toggle the display of graphic effects left by characters feet. Toggles between enabled and disabled when no subcommand is specified. Value Description Subcommands on Enable effects made by feet. off Disable effects made by feet.
/physics [subcommand]	none	Toggle realistic physics effects. Toggles between enabled and disabled modes when no subcommand is specified. Value Description Subcommands on Enable realistic physics effects. off Disable realistic physics effects.
/profanity [subcommand]	none	Toggle the profane language filter. Toggles between enabled and disabled when no subcommand is specified. Value Description Subcommands on Enable the language filter. off Disable the language filter.
/scrollingbattletext [subcommand]	/sbt	Toggle the display of damage and other combat information. Value Description Subcommands on Enable graphic combat text. off Disable graphic combat text.
/extendeddraw [subcommand]	/edraw	Extend the range at which graphics are drawn. Toggles between off and on when no subcommand specified. Value Description Subcommands on Enable extended drawing. off Disable extended drawing.
/textclear [num] [subcommand]	/tc	Toggle the text auto-hide feature for num log window. Text will be hidden after 60 seconds. Toggles between off and on when no subcommand is specified. Value Description Subcommands on Turn on the log text hide feature. off Turn off the log text hide feature.
/camera [subcommand]	/cam	Set the current camera position as default when no subcommand is specified. Value Description Subcommands reset Reset position to system default.
/uilock [subcommand]	none	Prevents movement or resizing of UI elements. Toggles between on and off when no subcommand is specified. Value Description Subcommands on Lock the position and size of all UI elements. off Unlock the position and size of all UI elements.
/uihelp [subcommand]	none	Display pop-up help text for each UI element. Toggles between on and off when no subcommand given. Value Description Subcommands on Display help text. off Hide help text.

Player Search

Command	Shorthand	Help
/search [query] ...	/who	Search for players using the designated conditions. Results are displayed in the player search interface. The following can be used as search subcommands: Status Class Level Job Grand Company Affiliation Area Language Subcommands for the /search (/who) text command can be input directly in the language selected in the FINAL FANTASY XIV Config. Searches can also be made using words found in the auto-translate dictionary.

Other

Command	Shorthand	Help
/? [command name]	/?	Gives a detailed explanation of specified command. Abbreviations can be used. If a command name is incomplete or does not exist, similar commands will be listed. All names used with these commands must be either a single word or in quotation marks.
/macroicon [icon name] [category]	/micon	Changes icon with named item/action as specified by the category. Category defaults to action if none is specified. Category Icon Description action blueaction pvpaction Specified action, blue mage action, and/or PvP action will displayed as the icon. Recast time and required MP (if any) will be displayed with the icon. general Specified general action will be displayed as the icon. Recast time will be displayed with the icon. pet companion Specified pet/companion action will be displayed as the icon. item emote minion mount enemysign waymark gearset classjob quickchat Specified named item/entity will be displayed as the icon.
/wait [time] <wait.[time]>	none	A macro command for adjusting the pause between commands. A wait time amount of 1 equals one second. The maximum wait time allowed is 60. If the wait time amount is over 60, it will be counted as 60. e.g. /action Swiftcast <me> <wait.1>
/battlemode [subcommand]	/bm	Toggles between active and passive mode. Toggles between active and passive mode when no subcommand is specified. Value Description Subcommands on Switch to active mode. off Switch to passive mode.
/item [item name] [target name]	none	Uses an item on the specified target. Cannot be used with items that are not in your inventory, or when restricted by other factors.
/marking [num] [target]	/enemysign	Set an enemy sign on the specified target. Select the type of sign using a number from 1 to 8 Example: /enemysign 1 sets sign type one on target.
/automove	none	Begin moving in the current direction you are facing; move backwards to cancel manually. Toggles between on and off when no subcommand is specified. Value Description Subcommands on Turns autowalk/autorun on. off Turns autowalk/autorun off.
/check [target name]	none	Checks the targeted player.
/timer [subcommand]	none	Displays the Timers Interface, showing the Daily and Weekly Checklist for in-game activities as well as the time remaining until their Daily/Weekly Resets.
/random [subcommand]	/dice	Roll a random number between 0 and the specified upper limit value (from a minimum of 2 up to a maximum of 999). Results will be displayed in a /say radius. Rolls will be between 0 and 999 if no upper limit value is designated.
/equiplinkshell [subcommand]	/el	Activate the designated linkshell. Unequips active linkshell when no subcommand is specified. Value Description Subcommands LS Name Equip linkshell with provided name. Quotation marks are required for names containing a space. LS Number Equip linkshell corresponding to designated number.

Placeholders

The following placeholder commands are also available for chatting and text commands.

Targeting Placeholders

Placeholder	Description
<t>, <target>	Displays current target's name.
<tt>, <t2t>	Displays target of current target's name
<f>, <focus>	Displays your focus target's name
<r>, <reply>	Displays the name of the last player to send you a /tell
<pet>	Displays your current (Familiar/Egi/Fairy) name
<comp>, <buddy>, <c>, <b>	Displays your summoned chocobo companion's name
<mo>, <mouse>	Displays the name of the target under your mouse cursor (or party/ally UI)
<f>, <focus>	Displays the name of your /focustarget
<me>, <0>	Displays your character's name.
<1>	Party Member 1. Displays name of first party member in list.
<2>	Party Member 2. Displays name of second party member in list.
<3>	Party Member 3. Displays name of third party member in list.
<4>	Party Member 4. Displays name of fourth party member in list.
<5>	Party Member 5. Displays name of fifth party member in list.
<6>	Party Member 6. Displays name of sixth party member in list.
<7>	Party Member 7. Displays name of seventh party member in list.
<8>	Party Member 8. Displays name of eighth party member in list.
<la>, <lastattacker>	Displays the last enemy that attacked you.
<le>, <lastenemy>	Displays the last enemy you targeted.
<lt>, <lasttarget>	Displays your last target.
<attack1>, <attack2>, <attack3>, <attack4>, <attack5>	Displays target to attack 1-5's name (using signs)
<bind1>, <bind2>, <bind3>	Displays target to bind 1-3's name (using signs)
<ignore1>, <ignore2>	Displays target to ignore 1-2's name (using signs)
<square>	Displays the name of the target marked with a square (using signs)
<circle>	Displays the name of the target marked with a circle (using signs)
<cross>	Displays the name of the target marked with a cross (using signs)
<triangle>	Displays the name of the target marked with a triangle (using signs)

Non-Targeting Placeholders

Placeholder	Description
<class>, <job>	Displays current class (or job) and level. Example: scholar(80)
<hp>	Displays current HP and maximum HP. Example: 150/200
<hpp>	Displays current HP as a percentage. Example: 75%
<mp>	Displays current MP and maximum MP. Example: 75/100
<mpp>	Displays current MP as a percentage. Example: 75%
<comphp>	Displays your chocobo's current HP and maximum HP. Example: 150/200
<comphpp>	Displays your chocobo's current HP as a percentage. Example: 75%
<thpp>, <targethpp>	Displays target's current HP as a percentage. Example: 75%
<fhpp>, <focushpp>	Displays focus target's current HP as a percentage. Example: 75%
<fclass>, <focusclass>, <fjob>, <focusjob>	Displays focus target's class (or job). Example: astrologian
<pos>	Display's coordinates of current location.
<flag>	Display's coordinates of flag's location.
<recast.[action name]>	Display's cooldown for specified action. Example (<recast.summon seraph>): 1:32

Guides

Main article: Macro Guides